Home Events Newsletter Library Classifieds Gallery Links Contact Us Join RWS FAQs
NOTICE: The Rochester Woodworkers Society, Inc. provides this forum as a service for it's members. It does not have any responsibility, financial or otherwise, for the items or services offered here. The dealings are solely between the buyer and seller.
If you wish to list items of a woodworking interest in the Classified section, submit the pertinent information/photos to webrochesterwoodworkers.org. Unless there is a request to keep items listed, they will be removed after 90 days at the Webmaster's discretion.
PLEASE NOTE
To avoid propagating spam, we have started to depict e-mail addresses with an image for the '@' symbol. Make certain you substitute this when you copy an address into your e-mail program.
Posted 01/22/09
Jet 1442VS Lathe (Variable pulley model).
$450, including cast iron legs. (Currently selling new for over $1000, plus shipping.) This is a great lathe for someone who wants to move up from a mini lathe. Contact Kevin Hart, at kevindhart
gmail.com or 442-5789.
Posted 01/20/09
I have 5 uncut basswood trees tops logged from my property and am willing to sell. Located in Honeoye. Contact Mike Lynch at 585-991-8724 or michaelseanlynch
Posted 12/30/08
INCA 710 Band Saw $750
I am the original owner of this extremely well designed and built Swiss band saw. The unusual 3 wheel design allows for a very wide 20 inch throat (although it should be noted the 3 wheel design results in the need for careful tracking adjustment). The 2 inch riser block results in a 10 inch resaw capability (maximum blade width is 1 inch). The American made Dayton 1.5 hp motor can be selected for either 110V or 220V operation. The original price of the band saw was $1445. I have the original manual and receipt. The band saw has seen limited use. It is in clean and in excellent mechanical condition, except for some wear on 2 of the 4 guide bearings. The trust bearings are excellent.
If interested, please contact Roger Gaborski at rsg
Posted 12/3/08
Wood lathe 10" Rockwell (Made in Canada) model 46010 with 1/3 HP motor, providing 4 speeds, and 8 turning tools, good condition. $65 without workbench, $100 with metal leg workbench. Ryobi 10" power planer model AP10. Includes knife alignment jig, extended in feed / out feed, 4" dust port, works great. $65 for all.
Contact Alan at avandemoere
Posted 11/28/08
Power-Kraft wood lathe, all cast iron 4speed step pulley, 1/2hp motor. 30" between centers, 6 1/4" swing over bed. 1"-8tpi adaptor. Wrenches, New head bearings. Sturdy wooden stand with parts drawer. Good running, good machine $125/ offers.
Pictures at http://rochester.craigslist.org/tls/911348156.html
Craftsman 18" jig saw vg condition. All cast iron, runs well. With motor and cabinet stand with casters. $100./ offer
Pictures at http://rochester.craigslist.org/tls/911354730.html
Contact Paul Osborne - 255-0531 or paul
We had some trees brought down on our property that had the potential of falling on our home.
We have a black cherry log that we think someone might be able to use for woodworking, cupboards, etc. It is 18 foot long and starts at 29 inches diameter down to 19 inches in diameter.Price would be negotiable.
If interested, contact John Dobeck at 585-742-8536 or sohill15
6 pc. Robert Sorby turning tool set: (1) H0506 Multi-tip hollowing Tool
(1) H0496 3/4 Roughing-out Tool
(1) H0502 3/16 Parting Tool
(1) H0497 3/4 Skew Chisel
(1) H0490 1/4 Bowl Gouge
(1) H0494 3/8 Spindle Gouge
(1) Grizzly Gouge SlipstoneSet sells in Cat. for $330. asking $190.00
Contact Hal C. Lee hcleesales
Home
Events
Newsletter
Library
Special Interest Groups
Join RWS
Classifieds
Gallery
Links
Members Archives
Sponsors
Questions or comments?
Check our
FAQs
or
Contact us
Rochester Woodworkers Society, Inc. Ó 2000-2008
This page last updated on
01/22/2009 RWS
ByLaws
Privacy Statement
Editorial Policy
Website Credits
